If you are a singer are are starting to look for gigs then sooner or later you will find that you will need to invest in a PA unit.
If you are not sure what one is, how to set it up and how it all works then hopefully I’m going to try to clear all of that up for you in this post.
Even if you are a seasoned PA setter-uper-er (is that even a word??) I can’t count the amount of times I’ve seen singers set their PA units up wrongly, which results in high levels of feedback and makes the singer sound horrible.
So I’m going to walk you through everything you need to know about PA’s as a singer and how to set yours up the right way.
Let’s start with the basics:
With what exactly is a ‘PA’?
‘PA’ stands for Public Address and a Public Address system can be anything that amplifies sound to a point where it can be heard in a public setting by other people.
However, PAs are not amps. The difference between an amp (i.e amplifier) and a PA is that an amp has limited capabilities. Amps typically just amplify sound and you have one amp per instrument, whereas a PA will let you plug several instruments into a mixer and have all those instruments come out through your front of house speakers.
PAs also let you alter a lot more than just the volume. You can increase the amount of treble, bass and mid frequencies plus (depending on your mixer) you should be able to add reverb – and set all of things things differently for each instrument.
In a nutshell, a basic PA will consist of:
1. A mixer – this is where you plug in all of the instruments
2. Leads – to attach everything
3. Speakers – depending on where you are playing and how much volume you need will depend on how big these speakers need to be and whether you add foldback speakers (foldback speakers are the ones that face towards you on stage, while ‘front of house’ speakers are the ones that point towards the audience)
To make things really clear, I’ve drawn a couple of little diagrams for you:
TIP: Many portable PA units (like the Yamaha STAGEPAS 600I Portable PA System
that I use myself – have mixers and leads built into the system so its super easy)
TIP: When I needed a larger PA system, instead of going out and buying a whole new one, I just added two big speakers to my Yamaha StagePas and hey presto! Enough sound for 400 people outdoors – more than you’ll ever need.
Just so you know, if you ever do larger gigs than this, there will most likely be a sound engineer and all the gear provided by the gig organiser. In all my years of gigging, I’ve never needed to provide anything larger than this.
Other important PA set up stuff you’ll need to know
- Make sure the front of house speakers are in front of the mic. If they are behind (generally) you will get that high pitched feedback squeal that makes everyone cringe.[spacer height=”20px”]
- Don’t point the microphone directly at the speakers for the same reason.[spacer height=”20px”]
- The reverb you hear coming out of the fold back speakers may be different to the reverb the audience hears so check this before you start.[spacer height=”20px”]
- Playing outdoors will require double the speaker oomph because there are no walls to contain the sound.[spacer height=”20px”]
- Take black gaffa tape with you to the gig because you will need to tape down the leads to avoid people tripping over them[spacer height=”20px”]
- Take a long black extension chord with you and an extension plug because you always need the extra outlets[spacer height=”20px”]
- Put a spare jack to jack lead into your gig bag – someone nearly always forgets to bring theirs and you’ll use it often.
Now I’d love to hear from you. Did you find this post useful? Is there anything else you would like to know about setting up equipment for gigs? If so, please leave me a comment below and I’ll see what I can do to help out.
Nicola x
Links to gear if you need it
The Yamaha StagePas has been perfect for doing cafe gigs, small outdoor gigs and pretty much everything up to 100 people indoors. Its super portable and lightweight and has been very reliable with great sound.I used one of these for quite a few years on gigs. Its the ‘industry standard’ vocal mic and a decent first mic if you are just starting out.
Nicola xx
I would like to make a little set for 4 men singing I have a six outlet yamahamixer & i need to know what amp would go with it
would the Yamaha 600 be enough for a church with 2 vocal microphones and 2 acoustic guitar”s
It depends on the size of the church but probably, yes.
How did you rig up bigger speakers to you stagepass for a bigger sound..
I find that my stagepass 600 looses power as the room fills and i higher the sound up… when i sing it drains from the backround music…
I know i can attach a sub to the sub output… are you doing something equal to this with speakers.. in short.. i find that this system i bought is proving not loud enough for my gigs… can you advise.. thank you.
Hi Paula,
Did you get a solution to your issue as im in a similar situation.
Hi There,
I recently bought the StagePass 600i and found that the vocals are constantly clipping, and I have no idea how to fix it. Any idea?
Kind regards,
Gareth
How do you connect the guitar amp to the mixer in the larger gig setup? using a mic?
When I play keys, I just plug the keyboard straight into the mixer so it comes out of the foldbacks/ front of house speakers. No amp needed.